Linear Positioning Accuracy

Maintenance Diagnostic Systems, Inc. works with the RENISHAW brand to offer linear positioning accuracy services. Calibration services are vital because they will help you ensure that the input and your measured output work under specific conditions. This service will allow us to determine how accurate your instrument is. If your company tries to maintain ISO standards, you can use linear positioning accuracy services to ensure that your equipment works within the right specifications.

Benefits of Linear Calibration

When you have calibration done correctly, you can standardize and trace your measured quantities back to a certain standard. It is vital that your company be able to prove that your equipment meets national standards. This will allow you to have better relationships with your customers, as well as meet the requirements for your company.

When it comes to determining how often to get linear calibration, it will depend on your equipment. You will also need to consider the potential cost of not calibrating often enough. This can potentially cause the equipment to stop functioning at a critical time. We can help you figure out how often to get calibration. Contacting Maintenance Diagnostic Systems, Inc. today will get you the linear calibration services that your company needs.

Linear Calibration
Linear Calibration

Latest Case Studies:

This Month on the Road with MDS – January

This Month on the Road with MDS Hurco P.M.'s, alignment and calibration, before P.M. After P.M. Bay City Farrel VTL alignment and calibration. [gallery...

V-8 Engine Crank line: Flange face crank bolt alignment

Task:To align a dual cluster spindle head for 2 cranks being machined at the same time. Make dual master parts and adaptors for the spindles. We used existing cranks that had the correct dimensions on the Mains and orient ID for location. We then machined the .500...

Draw Bridge shaft alignment

Task: To make sure the inboard and outboard bores are in-line with one another. Make legs to fit 36” diameter hole and set up for laser to pass through on centerline. Issues: Since the job had to be competed outside we had to cover the bridge weldment with a tarp to...